Create real metal parts using any open-architecture FFF/FDM 3D printer—or even a 3D printing pen.
Available Formats:
Spools: 1.75mm and 2.85mm diameters in 0.5kg and 1kg weights
Pellets: 1kg jars
Filament Density:
4.10g/cc – 4.50g/cc
Metal Content:
82.0% – 86.0% bronze (89/11 tin bronze)
High Compatibility:
Works with virtually any open-architecture 3D printer—no proprietary hardware or specialized equipment required. Also compatible with 3D printing pens.
👉 Our list of Trusted 3D Printers – Click Here
Easy Printing Experience:
-
Print with a 0.6mm hardened steel, standard flow nozzle
-
Prints similar to PLA
-
Minimal to no warping
-
Ensure the filament feeds straight into the extruder
👉 More information on printing – Click Here
Fully Sinterable:
After printing, your part can be fired in a furnace to become 100% metal.
👉 Debinding & Sintering Instructions – Click Here
Beginner-Friendly:
Bronze Filamet™ is our easiest material to print and sinter—ideal for those just getting started with metal 3D printing.
Applications:
Additional Links:
👉 SDS and TDS – Click Here
👉 Research Papers – Click Here
Explore More Metal Filaments:
All print just like PLA on most open-architecture 3D printers.
Recycle empty spools with the spool buy-back program – Click Here
Large orders may be subject to longer lead times. Contact us for more accurate lead times.
FAQ:
❓ Can I print this on my printer?
✅ Filamet™ is compatible with nearly all FFF/FDM based 3D printers on the market. Switch out the nozzle for a 0.6mm hardened steel nozzle and get printing! The list of printers that have been used and the ones that are not compatible can be found here: https://thevirtualfoundry.com/trusted-printers/
❓ What can I expect for final sintered density of my parts?
✅ Using the instructions we provide, you can expect around 90–95% density. Instructions for sintering are here: https://thevirtualfoundry.com/debind-sinter/
❓ How strong are parts right off the printer?
✅ They are quite a bit stronger than you may expect. You can throw them around a little and handle them just fine. Generally, they will not handle load nearly as well as the base PLA would on its own.
❓ Can I just debind my part and not sinter it?
✅ A part that has just been debound does not have structural integrety. Bronze parts specifically, can be handled gently, but you must be careful.
❓ How can I make my part shiny straight off the build plate?
✅ If you are looking to polish up a part without going through debinding and sintering, you can sand the part with progressivly finer sand paper from 120 to 3000 grit. Then polish with a polishing cloth. For a mirror shine, use a cotton buffing wheel and some Zam polishing compound. More instructions here: https://thevirtualfoundry.com/finishing/
